3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle
3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle. The Z series pairs a 50° rear steering axle with a 3500 kg rated load and 36.8 kW engine. Brochure machine weight is 5300 kg. Multi-stage masts are available on request; specify the required lift height and confirm the load chart. This Z configuration has a cast-iron counterweight.
Select a thumbnail to view another image. Click the main image to open it at full size.
Off-Road Forklift
3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle
3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle. The Z series pairs a 50° rear steering axle with a 3500 kg rated load and 36.8 kW engine. Brochure machine weight is 5300 kg. Multi-stage masts are available on request; specify the required lift height and confirm the load chart. This Z configuration has a cast-iron counterweight.
Images show the supplied product reference materials. Specifications, attachments and available configurations must be confirmed in the final quotation.
Overview
Start with your working requirements
The Z series pairs a 50° rear steering axle with a 3500 kg rated load and 36.8 kW engine. Brochure machine weight is 5300 kg. Multi-stage masts are available on request; specify the required lift height and confirm the load chart. This Z configuration has a cast-iron counterweight.
For outdoor yards, farms and construction sites, compare the ground surface, gradients, load weight and required lift height. Confirm the load chart and approved operating limits for the selected configuration.
Equipment Selection
Share the application, load or material, site access and daily workload to discuss a suitable model.
Configuration
Confirm the power system, dimensions and attachment requirements before placing an order.
Product Support
Send the model, serial number and photos when requesting operating or maintenance information.
Product Images & Specifications
Images show the supplied product reference materials. Specifications, attachments and available configurations must be confirmed in the final quotation.
Reference configuration
Rated load
3500 kg
Steering axle angle
50°
Engine power
36.8 kW
Drive
4WD
Operating weight
5300 kg
Dimensions (L × W × H), as listed
3200 × 1800 × 2250 mm
Wheelbase
1750 mm
Minimum ground clearance
230 mm
Mast tilt (forward / rear)
8° / 11.5°
Fork length
1220 mm
Minimum turning radius
2200 mm
Front tyres
20.5-16
Rear tyres
12-16.5
Transcribed from the supplied model reference sheet. Values describe that configuration; confirm the ordered configuration, load chart and operating limits in writing. Open product reference
A model name alone does not specify the complete machine. Match the quotation, technical sheet and agreed equipment configuration before confirming your order.
Capacity and lift height
For a forklift quotation, state the load weight, load dimensions, required lift height and any attachment. Ask for the load centre and the capacity information for that exact mast and attachment combination. A catalogue lift-height range describes options; it does not mean the rated load can be lifted to every height.
The catalogue specifications are not a load chart. Where configuration-specific capacity information is not shown, request it before selecting the machine.
Power and transmission
For diesel models, confirm the engine model, rated power, transmission and drive configuration in the quotation. For electric models, confirm the battery chemistry, voltage, capacity, charger supply and motor ratings. Options shown for a series may differ between individual machines.
Inspection and video requests
Include any inspection or video requirements with your inquiry so availability and scope can be agreed before ordering. A useful operating record identifies the model and configuration, actual load, load centre, lift height, ground conditions and recording date.
Ask for an uninterrupted view of the agreed operation. A demonstration video does not replace the machine's capacity information or operating instructions.
What rated load is listed for 3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle?
The supplied reference sheet lists a rated load of 3500 kg for 3.5 t Z Series Rough-terrain Forklift | 50° Steering Axle. Permitted capacity depends on the mast, lift height, load centre and attachment; confirm the configuration-specific load chart before ordering.
What turning radius is listed for 3.5 t Z / 50°?
The reference sheet lists a minimum turning radius of 2200 mm. Aisle requirements also depend on the load dimensions and manoeuvre; provide your aisle width and pallet dimensions when requesting a configuration.
Use this checklist to compare offers and request a configuration that fits your site.
01 / Machine & application
Share the model, intended task, access width and working conditions. Request current machine photos or an operating video for the proposed configuration.
02 / Price & delivery
Include quantity and destination country or port. Ask the quotation to specify minimum order, payment terms, production lead time, packing and freight scope.
03 / Documents & support
Confirm model-specific documents, warranty coverage and exclusions, spare parts and maintenance instructions in writing before ordering.
EN
