FANGSHENG INTELLIGENT

FC-ME17 Mini Excavator

Name: FC-ME17 Mini Excavator
Brand: FANGSHENG INTELLIGENT
SKU: FC-ME17

FC-ME17: 1800 mm maximum digging depth and Laidong 385 engine listed in the FangSheng brochure. Compare specifications and request a quotation.

Select a thumbnail to view another image. Click the main image to open it at full size.

Excavators

FC-ME17 Mini Excavator

FC-ME17: 1800 mm maximum digging depth and Laidong 385 engine listed in the FangSheng brochure. Compare specifications and request a quotation.

Model / Series: FC-ME17
Category: Excavators
Brand: FANGSHENG INTELLIGENT
Configuration: Confirmed with quotation

Maximum digging depth: 1800 mm
Dimensions (L × W × H), as listed: 3250 × 1100 × 2300 mm
Engine: Laidong 385
Model code in brochure table: FC-QH17

Request a Quote ↗Discuss this model on WhatsApp ↗Product Images & Specifications ↓

Images show the supplied product reference materials. Specifications, attachments and available configurations must be confirmed in the final quotation.

Overview

Start with your working requirements

The FC-ME17 entry on page 8 of the FangSheng excavator brochure lists a Laidong 385 engine and overall dimensions of 3250 × 1100 × 2300 mm. The table below follows that brochure entry. Existing machine images and detail sheets are retained for reference; use the current brochure values when comparing configurations.

For landscaping, trenching and compact sites, compare access width, digging reach and transport constraints. Ask us to confirm attachment compatibility and the final engine configuration.

Equipment Selection

Share the application, load or material, site access and daily workload to discuss a suitable model.

Configuration

Confirm the power system, dimensions and attachment requirements before placing an order.

Product Support

Send the model, serial number and photos when requesting operating or maintenance information.

Product Images & Specifications

Images show the supplied product reference materials. Specifications, attachments and available configurations must be confirmed in the final quotation.

The brochure heading is FC-ME17; its parameter table uses FC-QH17. Both references are retained on this product page. Confirm the order code in the quotation.

Brochure specifications · page 8
Maximum digging depth	1800 mm
Dimensions (L × W × H), as listed	3250 × 1100 × 2300 mm
Engine	Laidong 385
Model code in brochure table	FC-QH17
Displacement	1.6 L
Rated power / speed	29 kW / 3200 rpm
Horsepower (brochure)	38 HP
Fuel tank capacity	20 L
Maximum unloading height	1850 mm
Maximum digging height	2680 mm
Gradeability (brochure reference)	30°
Travel speed	0–3 km/h
Bucket digging force	16 kN

Values transcribed from the current FangSheng excavator brochure. Confirm the ordered configuration and operating limits in writing. Open product reference

Open product reference ↗

Open product reference ↗

Open product reference ↗

Open product reference ↗

Questions about this configuration

How deep can the FC-ME17 reference configuration dig?

The reference sheet lists a maximum digging depth of 1800 mm, maximum digging height of 2680 mm and maximum unloading height of 1850 mm. These are different measurements; compare the working envelope with your trench and material-placement requirements.

Which engine is listed for FC-ME17?

The reference configuration lists a Laidong 385 engine with rated power / speed of 29 kW / 3200 rpm. Confirm the engine included in your quotation and the documents required for your destination.

What overall dimensions are listed for FC-ME17?

The brochure lists overall dimensions of 3250 × 1100 × 2300 mm for FC-ME17. Check the machine width against your narrowest access point, and confirm transport dimensions and attachment positions before arranging delivery.

See the reference specification →

Compare this model with other excavators →

Selection guides and support

Equipment selection guide →Parts, documents and service →Compare working applications →

Plan your equipment order

Use this checklist to compare offers and request a configuration that fits your site.

01 / Machine & application

Share the model, intended task, access width and working conditions. Request current machine photos or an operating video for the proposed configuration.

02 / Price & delivery

Include quantity and destination country or port. Ask the quotation to specify minimum order, payment terms, production lead time, packing and freight scope.